Manifold Valve - A 5VM R 1
These manifolds are designed for remote mounting on instruments using threaded instrument & process connections. These valves are having two isolation, one equilizer & two drain/calibration valves. The standard process & instrument connections are ½" NPT F & the drain connections are ¼" NPT F. The blanking plugs are provided. The instruments connections are positioned at 54 mm center distance but can also be used for other center distances with the help of screwed fittings. Different models are available as shown below.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT F
- Standard instruments connection: ½" NPT F
- Drain: ¼" NPT F
- Weight: 2.70 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM R 2
These manifolds are designed for remote mounting on instruments using threaded instrument & process connections. These valves are having two isolation, one equilizer & two drain/calibration valves. The standard process & instrument connections are ½" NPT F & the drain connections are ¼" NPT F. The blanking plugs are provided. The instruments connections are positioned at 54 mm center distance but can also be used for other center distances with the help of screwed fittings. Different models are available as shown below.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT F
- Standard instruments connection: ½" NPT F
- Drain: ¼" NPT F
- Weight: 3.30 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM D 1
These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equalizer & two vent / calibration valves. The standard process & instruments connections are ½" NPT. Two vent connections are ¼" NPT in all manifolds & provided with blanking plugs. Different models are available as shown.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT F
- Standard instruments connection: Flanged
- Drain: ¼" NPT F
- Weight: 3.30 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM D 2
These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equalizer & two vent / calibration valves. The standard process & instruments connections are ½" NPT. Two vent connections are ¼" NPT in all manifolds & provided with blanking plugs. Different models are available as shown.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT F
- Standard instruments connection: Flanged
- Weight: 2.70 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM DT
These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equalizer & two vent / calibration valves. The standard process & instruments connections are ½" NPT. Two vent connections are ¼" NPT in all manifolds & provided with blanking plugs. Different models are available as shown.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT F
- Standard instruments connection: Flanged
- Drain: ¼" NPT F
- Weight: 2.90 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM DH
These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equalizer & two vent / calibration valves. The standard process & instruments connections are ½" NPT. Two vent connections are ¼" NPT in all manifolds & provided with blanking plugs. Different models are available as shown.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: Flanged
- Standard instruments connection: Flanged
- Drain: ¼" NPT F
- Weight: 2.70 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.
Manifold Valve - A 5VM DP
These valves are designed for direct mounting to differential pressure transmitter. The instrument side is provided with a standard flange of 54 mm or 32 mm center distance. These valves are having two isolation, one equalizer & two vent / calibration valves. The standard process & instruments connections are ½" NPT. Two vent connections are ¼" NPT in all manifolds & provided with blanking plugs. Different models are available as shown.
Standard Specification:
- Maximum working pressure: 413 bar / 6000 PSI at 100°C
- Material: 316 SS / 316L SS / 304 SS / Carbon Steel
- Gland Packing: PTFE / Graphite
- Standard process connection: ½" NPT M or G ½" M
- Standard instruments connection: Swivel Nut G ½"
- Drain: ¼" NPT F
- Weight: 3.70 kg
- MOC in accordance with NACE MRO175 is available on request.
- Monel, Inconel, Hastelloy, Duplex Steel are also available on request.
- Valves for 10000 PSI working pressure are also available.